|Water Heater Tank Capacity||5 - 9.9 L|
SAWHEAT ACID Bath Heaters
Acid Bath heaters of the SAWHEAT range is a complete electric program for heating of tubs and tanks within the ACIDIC industry, deacidification and degrease system.
Bath heaters are available with sheath of different materials e.g. porcelain, titanium, PTFE coated steel, stainless steel and Quartz glass.
The heating element is made as an exchangeable ceramic insert with wires of nickel/chrome
Below is a list of standard items other lengths,
cold zones, voltage and wattages can be supplied.
The PVC cap with cable entry is IP55 and the standard cable length is 2 meter of 3 x 1.5 mm or 4 x 1.5 mm.
The cap must not be exposed to operating temperature over 70C.
To achieve the longest lifetime and best service of the bath heater. It is important to choose the best sheath material based on the chemicals to be used in the tubs.
If it is possible to state the type of chemicals and additives, our technical department can assist in choosing the correct sheath material.
However, chemical reactions and other conditions in the tubs can vary and thus create unforeseen factors which may influence the lifetime of the bath heater.
Very aggressive mediums may require PTFE coating to provide a long life and proper service function.
SAWHEAT bath heaters mounted with 2 m connection cables, IP55.
Cold zone is standard 150 mm.
Different lengths and cold zones are available.
|Temperature||1650 degree Celsius|
|Melting||1400 Degree Celsius|
|Tube Diameter||6.5 mm|
|Heath Length||106 1/4|
Tubular Heating Element
|Coil Inner Diameter||17 mm|
|Coil Lead Length||400 mm|
|Max Temperature Resistant||1450 Degree Celsius|
|Wire Diameter||3 mm|
|Coil Outer Diameter||20 mm|
|One Side Coil Length||1200 mm|
|Total Coil Length||3200 mm|
|Temperature||650 Degree Celsius|
|Heater Material||ss tube|
|Max. Operating Temp.||350 C|