|Max Temperature||1340 Degree Celsius in furnace chamber|
|Temperature Controller||Automatic, programmable controller|
|Temperature Measurement||1x sheathed controller thermocouple, type R type in ceramic protection tube|
|Overheating Protection||Standalone limit unit, standalone thermocouple|
|Power Controller||Thyristor 0-100%, zero switching - Solid State Relay|
|Frame||Steel frame and shell, double layer structured paint, heat stressed parts - heat resistant paint|
|Lining Insulation||Lightweight bricks, fibre ceramic plates, mineral mats|
|Working Height||Standard 800mm|
|Minimum Order Quantity||1 Piece|
|Material Loading Capacity (T)||20-50 kgs|
|Type Of Furnace||Fix|
SAWHEAT® Electric forging furnace has been designed to heat irons more efficiently, more safely and respecting the environment.
Ø Heating elements are made of electrical resistance heating Nichrome wires. Easily replaceable
Ø Automatic on & off features with digital display controller cum indicator. The Temperature can be adjusted as per the requirement & use. Easy to operate with one switch on/off , thermocouple sensor to monitor temperature.
Ø Double insulation of compacted ceramic fiber blanket, to avoid heat loss. The furnace is covered with heat painting to protect and prevent from heat loss.
Ø Temperature adjusted, depending on the work place of the furnace and Temperature requirement
Ø Reach temperature, 1000ºC. Maximum Temperature capability is 1200ºC.
Ø Useful internal cavity of the furnace: 140mm wide x 100mm high and 236mm deep.
Ø Maximum material capacity Ø 80mm.
MORE EFFICIENT: Consume up to 45% less electricity ( if using SCR) and reach a higher temperature than any furnace in its category. (More than 1000ºC).
SAFER: It has got new security systems for the operator. As per ISO 9001:2015 Standard
RESPECTFUL WITH THE ENVIRONMENT: Emissions below 0.002% of CO. Internal vermiculite coating, 100% natural and recyclable.
COSTING: The cost is comparatively very low as compared to Induction heating , Gas or Oil heating system.
Materials which can be used in this machine: Iron, Copper, Brass, Bronze, Ceramic, Glass and any material which needs less than 1200ºC Temperature requirement for molding use.
Reviewed by 14 Users
Most Relevant Reviews